Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Studio City
Dryer vent cleaning in Studio City runs $149 – $289 for a standard single-family home, and most jobs take about an hour. The price difference comes down to what kind of run you have: a short, straight vent on a 1950s ranch costs less than a long flex run snaking up through a hillside rebuild to a roof cap. If you’re in Studio City and your dryer takes two cycles to finish a load, the vent is almost certainly the problem, not the machine. Call (855) 341-8387 and we’ll give you a straight answer before you spend a dime on a service call.
Key Takeaways:
- Studio City’s two housing types – flatland ranches below Ventura Blvd and hillside rebuilds above it – have very different dryer vent failure patterns. We handle both.
- Our team uses Rotobrush rotary-brush agitation and Nikro HEPA-vacuum rigs. Same tools used in commercial duct remediation, not a shop vac and a prayer.
- We’re duct specialists. Air ducts, dryer vents, and duct repair are the only trades we work in. Your dryer vent is not an upsell.
- Free estimates by phone. One flat price per system agreed before we start. No per-vent pricing, no bait pricing.
Why Duct Cleaning Inglewood Is Studio City’s Preferred Dryer Vent Cleaning Company
Studio City homeowners call us because we know the difference between a 1950s ranch on a slab south of Ventura Blvd and a 2005 rebuild in the hills above Fryman Canyon. That may sound like trivia, but it isn’t. A flatland ranch typically has a short, straight dryer run that clogs slowly with household lint. A hillside rebuild often has a longer flex run climbing to a roof termination, and that run catches lint, Santa Ana dust, and wildfire ash in ways a flatland vent never will. When we quote a job, we’re quoting the actual vent you have, not a generic price from a call center.
Our Dryer Vent Cleaning technicians work in Studio City every week. We’re not driving in from three counties away and guessing at the local housing stock. We know the 91604 and 91614 ZIP codes, the mid-century streets off Moorpark and the canyon roads above Ventura Blvd, and we know what kind of lint load to expect in each. Nelson Adair runs the team, and he’s built our reputation on showing up with commercial-grade equipment and treating every vent like the fire hazard it becomes when ignored. Studio City customers call us back because we explain what we found – with camera footage when it matters – before we do anything else.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Commercial Dryer Vent Cleaning in Studio City
Commercial Dryer Vent Cleaning in Studio City covers laundromats, apartment buildings, and multi-unit properties where multiple dryers share one vent stack or where long common runs serve several floors. A commercial job in Studio City typically runs $400 – $1,200 per stack, depending on the number of dryer connections, the length of the common run, and whether roof access is needed. Property managers along Ventura Blvd and in the apartment clusters near the 101 know that a clogged common dryer stack doesn’t just slow drying – it’s a documented fire risk and a liability issue.
Multi-Unit Stack Inspections
We camera-inspect every commercial run before we quote. That alone separates us from a crew that shows up with a brush and a blower. Multi-unit stacks in Studio City’s older apartment buildings often collect years of tenant lint, and the lower floors always pack tighter because gravity pulls everything down.
Roof-Terminated Common Vents
Roof access on commercial properties means ladder work, safety harnesses, and a HEPA vacuum that can hold negative pressure on a long vertical run. We bring the Nikro rig for that. The job isn’t finished until we’ve removed the source material, not just knocked it loose to fall back down the stack.
Dryer Vent Cleaning Service in Studio City
Dryer Vent Cleaning Service in Studio City means one of our technicians runs a rotary brush through your entire vent from dryer to termination, while a HEPA vacuum holds negative pressure so the loosened lint never enters your laundry room. For a standard single-family home in the 91604 area, that’s $149 – $289. The work includes removing accumulated lint from the dryer transition hose, the wall penetration, and the full run to the exterior cap. If your vent terminates on a hillside roof, we’ll camera it first and quote based on what we actually see, not a guess.
Roof-Terminated Dryer Runs
Hillside homes above Ventura Blvd often have flex duct climbing through walls or attic space to a roof cap. These runs trap lint at every bend. A trap-only clean – which is what most DIY homeowners and budget crews do – misses 80% of the blockage. We go end to end.
Lint Removal and Cap Replacement
Older Studio City homes sometimes have original vent caps that are corroded, crushed, or missing a backdraft damper. We carry replacement caps on the truck and swap them during the same visit when needed. If a bird has nested in the termination, we’ll remove it and offer bird guard installation before we leave.
Trusted Brands We Service in Studio City
Your dryer vent doesn’t care what brand your machine is, but the termination, the transition hose, and any inline booster do. We work with vents tied to every major dryer brand, and we stock common cap sizes, transitions, and bird guards on the truck so we can finish most Studio City jobs in one visit. On the filtration side, we’re familiar with Honeywell and Aprilaire systems – that matters if your laundry shares space with a whole-home filtration setup or if you’re dealing with the fine dust that Santa Ana winds push into canyon homes. Your ducts are the only thing we do, and that focus means we don’t have to call a second contractor to finish something mid-job.
Common Dryer Vent Cleaning Problems We See in Studio City Homes
- Roof-vented hillside homes with long flex runs. Every bend in a flex duct traps lint. Rebuilds above Ventura Blvd often have fifteen to twenty-five feet of flex climbing to a roof cap, and we routinely pull out dense felt that no trap cleaning ever touches.
- Santa Ana dust and wildfire ash packed into exterior terminations. After a wind event, fine grit from the Sepulveda Basin and Griffith Park hills sifts into the vent cap and mixes with lint into a packed, fire-prone mass. This shows up fastest on canyon properties.
- Mid-century ranch remodels with spliced dryer runs. When a 1950s home on a slab gets an addition, someone often extends the dryer vent into the new space. That splice creates sagging low spots where lint settles, and the run no longer matches the floor plan.
- Laundry areas moved to interior closets. Studio City remodels frequently relocate the washer and dryer to a hallway closet or second-floor laundry. The new vent path is longer, has more turns, and often runs through unconditioned attic space where condensation makes lint stick to the duct walls.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Studio City, CA
A standard single-family dryer vent cleaning in Studio City runs $149 – $289. The lower end covers a short, straight run on a flatland ranch below Ventura Blvd. The upper end covers a longer run, a roof termination, or an older home where the vent cap needs replacement. Commercial stacks run $400 – $1,200 depending on the number of dryers and roof access requirements. What affects the price is the actual ductwork you have, not whether we think we can get a bigger invoice. That’s why we quote one flat price per system before we start. Call (855) 341-8387 for a free estimate over the phone. No technician will show up and start adding line items after the fact.
We Also Serve Cities Near Studio City
Our Studio City customers often ask if we cover the surrounding area. We do. We run dryer vent cleaning calls regularly in Hollywood, Beverly Hills, Rancho Park, and West Los Angeles, so if you’ve got a property in one of those neighborhoods, we’re already working nearby. The same flat pricing and the same equipment apply across the board.
Serving Studio City, CA – Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Studio City
Every twelve months, and sometimes more often if you’re in a canyon that catches Santa Ana dust or wildfire ash. A roof-terminated flex run in a hillside rebuild accumulates lint faster than a short flatland vent because every foot of flex and every bend creates a place for lint to hang up. If you run the dryer daily, don’t push it past a year. Camera inspection tells us exactly how loaded the run is. Call (855) 341-8387 and we’ll schedule an inspection with the clean.
Yes. Homes near the LA River corridor and the unpaved edges of the Sepulveda Basin pick up a fine silt that settles in exterior vent terminations and works its way into the dryer run. That silt mixes with lint into a denser, harder-to-remove blockage than pure household lint. It’s one reason we use negative-pressure extraction rather than just blowing air through – the silt has to be pulled out, not loosened.
After a brush fire in Griffith Park or the Verdugo Hills, fine ash sifts into exterior vent caps and outdoor laundry areas on canyon properties. Ash is abrasive and clings to lint, forming a packed mass that restricts airflow and creates a serious fire hazard. If you’ve had ash fall on your property, have the vent cleaned even if it was done recently. A quick visual check of the exterior cap is the bare minimum, and we’ll tell you over the phone whether a full clean is justified.
Yes. We handle commercial dryer vent cleaning for Studio City laundromats, apartment buildings, and multi-unit properties, typically $400 – $1,200 per stack. The job includes camera inspection of the common run, source removal with negative pressure, and roof access when the stack terminates above the roof line. Property managers along Ventura Blvd use us because we document before and after conditions, which is what a commercial insurer wants to see.
It can. Studio City homes run heating or cooling through most of the year, and that constant airflow pulls whatever dust and pollen is in the air into the home’s mechanical systems, including the laundry area. If your dryer vent terminates into a space that shares return-air pathways, you’ll load up faster than a home with a completely separate laundry room. Annual cleaning is the safe baseline, and we’ll tell you if your vent needs a different interval after the first inspection.
Call for a Free Studio City Dryer Vent Cleaning Estimate
If your dryer is taking two cycles to finish a load, or the vent flap outside doesn’t open when the dryer runs, that’s your signal. We’ll quote your Studio City dryer vent cleaning over the phone, based on your home’s layout and vent type, and we’ll honor that price when we arrive. Call (855) 341-8387 now or drop us a line through the site. Nelson Adair and the team handle every job, and we show up with the equipment to do it right the first time.
Written by Nelson Adair, Owner at Duct Cleaning Inglewood, serving Studio City and surrounding neighborhoods.